create a Balsa Wood stucture by 10 steps

To create a balsa Wood bridge or other wood structures, use a SolidWorks Library Feature, a Solid Works 3D Sketch and SolidWorks Weldments,
Here are the steps, video and model files to create a Balsa Wood ta3zwdkv Structure:
1. Create a cross section sketch of your wood as save as a library feature. Create all the cross sections of different wood members. Save each section as a library feature into a single folder, example My Weldments>Balsa.
2. Copy your My Weldments folder to the SolidWorks>data>Weldment Profiles folder.
3. Click Insert, 3D Sketch. Create a 3D Sketch. Use the Tab key to change to the XY, YZ, and ZX plane.
4. Add relations and dimensions to the 3D Sketch. Exit the Sketch.
5. Right-click in on the top Command Manager and Select Weldments.,
6. From the Weldment Toolbar, select Weldment.
7. Select Structural Member. Select the My Weldments folder for standard and Balsa for type.
8. Select your cross section.
9. Select your 3D Sketch members.
10. Select your larger members first. Then create other structures for the smaller cross members. You can modify the start point and plane of the cross sections.
11. Use Trim to create corners and butt ends.If you want to know more about balsa sheet , you can go to our wesite right now.